JCB PART BEARING 907/09600

JCB PART BEARING 907/09700

JCB PART BEARING 9071000

JCB PART BEARING 907/20045

JCB PART BEARING 907/50100

Kind of the Bearing:

●Sliding bearing

Sliding bearings are not divided into inner and outer rings and have no rolling elements, and are generally made of wear-resistant materials. Commonly used for low speed, light load and lubrication, and mechanical rotation of difficult maintenance.

●Joint bearing

The sliding contact surface of the joint bearing is spherical, and is mainly suitable for oscillating motion, tilting motion and rotational motion.

●Rolling bearing

Rolling bearings are divided into radial bearings and thrust bearings according to the load direction or nominal contact angle they can withstand. The radial contact bearing is a radial bearing with a nominal contact angle of 0, and the radial angular contact bearing is a radial bearing with a nominal contact angle greater than 0 to 45. The axial contact bearing is a thrust bearing with a nominal contact angle of 90, and the thrust angular contact bearing is a thrust bearing with a nominal contact angle greater than 45 but less than 90.

http://www.synctechnic.com/